XF-ZM5S
Double Step Door Edge Banding Machine双台阶子母门封边机
Door-processing machine for single-step and double-step leaf-and-a-half doors, with servo step forming, L-shaped pressing, upper gluing, quick melting and a complete edge-finishing sequence.
Request a QuoteMachine Details设备细节
Features
Servo Step Forming 1
Equipped with two servo lifting motors to precisely adjust the step height of leaf‑and‑a‑half doors. Digital servo positioning delivers high accuracy and eliminates repeated manual fine‑tuning. It saves labor and ensures consistent step dimensions with neat finished profiles.
Servo Step Forming 2
Equipped with two servo lifting motors to precisely adjust the step height of leaf‑and‑a‑half doors. Digital servo positioning delivers high accuracy and eliminates repeated manual fine‑tuning. It saves labor and ensures consistent step dimensions with neat finished profiles.
Servo Step Pre-milling
Designed to mill away surface burrs, ensuring tight band contact and improved edge bonding performance.
Heating Lamp
Heats the workpiece before gluing to support edge-band adhesion.
Upper Glue Pot
An upper glue pot feeds adhesive downwards for even coating and convenient cleaning.
Quick Melting
Rapid pre‑melting unit with automatic liquid‑level sensing. It pre‑melts glue granules and feeds molten adhesive to the upper glue pot automatically. It cuts preheating time and prevents glue yellowing from repeated overheating for stable continuous‑run production.
Servo L-Shaped Pressing
Servo positioning adjusts the pressing unit to different step thicknesses.
Rough Trimming
Rough Trimming unit rapidly removes excess banding from panel edges, preparing a uniform surface for final finishing. Durable tools and stable guidance ensure clean, vibration-free cutting across varying thicknesses.
End Cutting
Fast, stable front and rear edge trimming. The reinforced end-cutting unit minimizes panel impact during the trimming cycle, while the smooth vertical travel of the cutter head ensures consistent accuracy for every cut.
Fine Trimming
The fine‑trimming unit of the edge bander rounds off the upper and lower edges of the panel.
Scraping
Scraping unit eliminates the ripple marks caused by non-linear cutting motion during trimming, delivering smoother and cleaner top and bottom edges for improved surface flatness and tactile quality.
Flat Scraping
Floating scraping removes steps and glue marks for a flush edge.
Buffing
Buffing unit with cloth buffing wheels quickly polishes the edges, removing fine marks and enhancing surface gloss.
Technical Data技术数据
Specifications
Configuration配置
- Machine category设备分类
- Door processing / door edge banding门机 / 子母门封边机
- Application适用加工
- Single-step and double-step door edges单台阶及双台阶子母门
- Gluing涂胶方式
- Upper glue pot上置胶锅
- Control控制系统
- PLC
Technical Parameters技术参数
- Total power总功率
- 57 kW
- Overall size外形尺寸
- 9200 × 930 × 1600 mm
- Power supply电源
- 380 V / 50 Hz
- Working air pressure工作气压
- 0.6 Pa
- Feed speed进给速度
- 7–14 m/min
- Tape thickness封边带厚度
- 0.4–0.6 mm
- Panel thickness板材厚度
- 20–60 mm (custom thickness available)20–60 mm(其他厚度可定制)
- Minimum panel length最小板材长度
- ≥250 mm
- Minimum panel width最小板材宽度
- ≥150 mm